Automatic spray gluing machine with conveyor belt and dryer unit, working width mm 750
- The model TB801-N+UNA6.1 is an automatic machine for applying water base adhesive by spraying.
- The maximum width of working is mm 1.540.
- The material is placed on a belt conveyor that moves forward while the spray gun, that applies the adhesive, moves alternatively from right to left.
- The possibility to adjust the time and the advancement speed of the belt conveyor and also the gun speed, permits to obtain a good application of the adhesive.
- The settings of the different cycles are programmed by LCD touch screen. The model TB801-N+UNA6.1 is equipped with a motor fan unit that blows warm air on the glued materials placed on the back side of the belt conveyor.
- The air temperature is adjustable and may arrive till 70°C.
- The suction unit permits also to reactivate the adhesive for having a better adhesion of the parts.
- The belt conveyor (very easy to change) is realized on polyester fiber with thickness of mm 5.
- The suction under the belt conveyor blocks the pieces during the adhesive spraying phase.
- The suction system,in addition to block the pieces on the conveyor belt, attracts the overspray between the filter panels placed on the left, right and back side of the machine.
- The suction system has an aspiration flow of 1.800 cubic meters/hour.
|Dimensioni (L/P/H)||Dimensions (L/P/H)||130 x 210 x 195 cm|
|Alimentazione pneumatica||Air supply bar||6 bar|
|Alimentazione elettrica (TB801-N)
||Power supply (TB801-N)||220/50 – 60 hz 1 phase (volt)|
|Potenza assorbita (TB801-N)||Power consumption (TB801-N)||1,2 Kw|
|Alimentazione elettrica (UNA6.1)
||Power supply (UNA6.1)||400/50 – 60 hz 3 phase + neutral
|Potenza assorbita (UNA6.1)
||Power consumption (UNA6.1)||4,8 Kw|